Door bodyOr as the door grill is known: it consists of iron, which is resistant to rust, corrosion, and various weather conditions.
The garage door rail, which is a channel through which the garage door moves: There are two types that can be made of galvanized iron or aluminum, and there is no need to grease them at all, and this is due to the presence of a poly-glide rubber strip at the bottom, which facilitates the door’s sliding on the rail.
The movement column: It is made up of an iron pipe with sprung coils attached to it and heat-treated with oil. It is also made up of pulleys and wheels made of hardened plastic or nylon. This gives strength and ease of sliding and smoothness that facilitates lifting the door. It also contains a door holder that holds the door to hang it, which is a heavy iron angle that weighs half a ton.
The bottom bar of the garage door: As for the front of the door, it is made of reinforced aluminum in order to be able to withstand shocks and also to fix the elements on the facade. The bottom of the front of the door will be equipped with a rubber plastic bar, and this will prevent insects, dust, or rain from entering from the bottom of the door to the interior.
The electric operating system can be operated in two ways: the first is manually: by raising or lowering the door by hand or automatically: through a switch or an open and close button in the control box or by a remote control.
There are many problems that can affect the garage door and cause it to malfunction, so the owner of the garage door must be aware of simple garage door problems and know how to repair the electric garage door. There are many mistakes that the owner of an automatic gate can make, which forces him to maintain automatic gates, including:
Firstly - not knowing the type of raw material from which the garage door is made, and therefore knowing how to periodically care for it to avoid any damage from peeling or change in color..
Secondly - neglecting to use stainless steel spray, which is placed between the door hinges and placed on the movable latch and on the lifting chain.
Third - Do not inspect and clean the garage door rollers and tracks periodically. Give them a good cleaning on an ongoing basis.
Fourth: Negligence in lubricating the hinges and tracks that are exposed to different weather conditions, including heat and cold around the world.
Fifth - Forgetting to apply for automatic door maintenance and garage door maintenance periodically on an annual or semi-annual basis.
There is also a problem with the remote of an automatic gate, which forces you to reprogram the remote, and the transmission between the remote and the automatic gates is lost, as this happens due to the long or frequent period of use, and in such a case the solution lies in reprogramming the remote, and we will mention to you one of the methods in order for you to be able to reprogram the remote. Before starting such a step, you must know the quality of the remote and its manufacturer, because each remote often has a different programming method from the other, and therefore you should Before you start programming the garage remote, you should check the remote user manual in order to obtain instructions that show you how to reprogram the device. All you have to do is compare the remote to the tensioner by constantly pressing the open button with the remote at the same time as you press the programming button together. Then, you release the open button, at a time when the garage door open light begins to flash.
We will also talk about the most prominent and common problems that can affect the garage door, in addition to the method of repairing the garage door: